Effective Tips to Repair Your Home Wood Fences
If you have a fence with a damaged section, it’s easy to underestimate the amount of work involved. You may think that repairing your fence will be too much of an undertaking or that hiring someone else to do it is too expensive. However, if you are willing to commit some time and energy to learn how to repair your wood fence, then this can be an extremely cost-effective way of doing so. Here we’ll discuss some wood fence repair tips for home wood fences.
Remove the Damaged Board
The first step in repairing a fence is to remove the damaged board. You can do this by using a hammer, pry bar, or a reciprocating saw to cut through the wood. If you are unsure how much damage there is, you can use an electric sander or grinder to sand down any areas that may need further attention.
Cut and Place New Stringers
Once you’ve determined the size of your new stringers, cut them to size. You can do this with a saw or hand tools. Be sure that there is enough space between each rail and that they are long enough to fit between them.
Determine Where You Want to Place the Posts
You should have a few feet of space between posts, with the posts spaced about 4 feet apart. The spacing between the posts should be at least 12 inches from the edge of your fence, and it should be 8 inches from center to center on each side.
Prepare Posts for Installation
Before you install the fence, make sure that the posts are treated with a preservative. You should not use paint or stain on wood fences because it will weaken them and cause them to rot over time. Instead, treat your fence with a water-resistant chemical to prevent decay and rot.
If you need professional help to repair your home wood fences here in Ball Ground, GA area, you may reach out to Clemente Fencing LLC for professional wood fence repair services. Call us at (470) 380-7808 today!